new p1_26 `{ return RPI_GPIO_P1_26; `}
# Select mode: input, output or alts
- fun fsel=(mode: FunctionSelect) `{ bcm2835_gpio_fsel(recv, mode); `}
+ fun fsel=(mode: FunctionSelect) `{ bcm2835_gpio_fsel(self, mode); `}
# Set output
- redef fun write(high) `{ bcm2835_gpio_write(recv, high? HIGH: LOW); `}
+ redef fun write(high) `{ bcm2835_gpio_write(self, high? HIGH: LOW); `}
# Set pull up mode
- fun pud=(pud: PUDControl) `{ bcm2835_gpio_set_pud(recv, pud); `}
+ fun pud=(pud: PUDControl) `{ bcm2835_gpio_set_pud(self, pud); `}
# Falling edge detect
# Do not use on raspbian, it is bugged!
- fun fen `{ bcm2835_gpio_fen(recv); `}
- fun clr_fen `{ bcm2835_gpio_clr_fen(recv); `}
+ fun fen `{ bcm2835_gpio_fen(self); `}
+ fun clr_fen `{ bcm2835_gpio_clr_fen(self); `}
# Raising edge detect
# Do not use on raspbian, it is bugged!
- fun ren `{ bcm2835_gpio_ren(recv); `}
- fun clr_ren `{ bcm2835_gpio_clr_ren(recv); `}
+ fun ren `{ bcm2835_gpio_ren(self); `}
+ fun clr_ren `{ bcm2835_gpio_clr_ren(self); `}
# High edge detect
# Do not use on raspbian, it is bugged!
- fun hen `{ bcm2835_gpio_hen(recv); `}
- fun clr_hen `{ bcm2835_gpio_clr_hen(recv); `}
+ fun hen `{ bcm2835_gpio_hen(self); `}
+ fun clr_hen `{ bcm2835_gpio_clr_hen(self); `}
# Low edge detect
# Do not use on raspbian, it is bugged!
- fun len `{ bcm2835_gpio_len(recv); `}
- fun clr_len `{ bcm2835_gpio_clr_len(recv); `}
+ fun len `{ bcm2835_gpio_len(self); `}
+ fun clr_len `{ bcm2835_gpio_clr_len(self); `}
- fun set_eds `{ bcm2835_gpio_set_eds(recv); `}
- fun eds: Bool `{ return bcm2835_gpio_eds(recv); `}
+ fun set_eds `{ bcm2835_gpio_set_eds(self); `}
+ fun eds: Bool `{ return bcm2835_gpio_eds(self); `}
# Return input on pin, true for high and false for low
- fun lev: Bool `{ return bcm2835_gpio_lev(recv); `}
+ fun lev: Bool `{ return bcm2835_gpio_lev(self); `}
end
extern class FunctionSelect `{ bcm2835FunctionSelect `}
end
redef universal Int
- fun bcm2835_delay `{ bcm2835_delay(recv); `}
- fun bcm2835_delay_micros `{ bcm2835_delayMicroseconds(recv); `}
+ fun bcm2835_delay `{ bcm2835_delay(self); `}
+ fun bcm2835_delay_micros `{ bcm2835_delayMicroseconds(self); `}
end
class RotaryEncoder
do
var fs = flag_function_set
if bits == 8 then
- fs = fs.bin_or(16)
+ fs = fs | 16
else if bits != 4 then abort
if lines == 2 then
- fs = fs.bin_or(8)
+ fs = fs | 8
else if lines != 1 then abort
if dots_wide == 10 then
- fs = fs.bin_or(4)
+ fs = fs | 4
else if dots_wide != 8 then abort
write(true, fs)
do
var fs = flag_display_control
- if on then
- fs = fs.bin_or(flag_display_on)
- else fs = fs.bin_or(flag_display_off)
+ fs |= if on then flag_display_on else flag_display_off
- if cursor then
- fs = fs.bin_or(flag_cursor_on)
- else fs = fs.bin_or(flag_cursor_off)
+ fs |= if cursor then flag_cursor_on else flag_cursor_off
- if blink then
- fs = fs.bin_or(flag_blink_on)
- else fs = fs.bin_or(flag_blink_off)
+ fs |= if blink then flag_blink_on else flag_blink_off
write(true, fs)
end
do
var fs = flag_entry_mode_set
- if left then
- fs = fs.bin_or(flag_entry_left)
- else fs = fs.bin_or(flag_entry_right)
+ fs |= if left then flag_entry_left else flag_entry_right
- if incr then
- fs = fs.bin_or(flag_entry_shift_increment)
- else fs = fs.bin_or(flag_entry_shift_decrement)
+ fs |= if incr then flag_entry_shift_increment else flag_entry_shift_decrement
write(true, fs)
end
var lb = once [1,2,4,8]
for i in [0..4[ do
var b = lb[i]
- var r = b.bin_and(v) != 0
+ var r = b & v != 0
var d = ds[i]
d.write(r)
end
var hb = once [16,32,64,128]
for i in [0..4[ do
var b = hb[i]
- var r = b.bin_and(cmd) != 0
+ var r = b & cmd != 0
var d = ds[i]
d.write(r)
end
var lb = once [1,2,4,8]
for i in [0..4[ do
var b = lb[i]
- var r = b.bin_and(cmd) != 0
+ var r = b & cmd != 0
var d = ds[i]
d.write(r)
end