loader: restore -m with module name (eg -m android)

[nit.git] / src / loader.nit

# This file is part of NIT ( http://www.nitlanguage.org ).
#
# Copyright 2012 Jean Privat <jean@pryen.org>
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# Loading of Nit source files
module loader

import modelbuilder_base

redef class ToolContext
        # Option --path
        var opt_path = new OptionArray("Set include path for loaders (may be used more than once)", "-I", "--path")

        # Option --only-metamodel
        var opt_only_metamodel = new OptionBool("Stop after meta-model processing", "--only-metamodel")

        # Option --only-parse
        var opt_only_parse = new OptionBool("Only proceed to parse step of loaders", "--only-parse")

        redef init
        do
                super
                option_context.add_option(opt_path, opt_only_parse, opt_only_metamodel)
        end
end

redef class ModelBuilder
        redef init
        do
                super

                # Setup the paths value
                paths.append(toolcontext.opt_path.value)

                var path_env = "NIT_PATH".environ
                if not path_env.is_empty then
                        paths.append(path_env.split_with(':'))
                end

                var nit_dir = toolcontext.nit_dir
                var libname = nit_dir/"lib"
                if libname.file_exists then paths.add(libname)
                libname = nit_dir/"contrib"
                if libname.file_exists then paths.add(libname)
        end

        # Load a bunch of modules.
        # `modules` can contains filenames or module names.
        # Imported modules are automatically loaded and modelized.
        # The result is the corresponding model elements.
        # Errors and warnings are printed with the toolcontext.
        #
        # Note: class and property model elements are not analysed.
        fun parse(modules: Sequence[String]): Array[MModule]
        do
                var time0 = get_time
                # Parse and recursively load
                self.toolcontext.info("*** PARSE ***", 1)
                var mmodules = new ArraySet[MModule]
                for a in modules do
                        var nmodule = self.load_module(a)
                        if nmodule == null then continue # Skip error
                        # Load imported module
                        build_module_importation(nmodule)
                        var mmodule = nmodule.mmodule
                        if mmodule == null then continue # skip error
                        mmodules.add mmodule
                end
                var time1 = get_time
                self.toolcontext.info("*** END PARSE: {time1-time0} ***", 2)

                self.toolcontext.check_errors

                if toolcontext.opt_only_parse.value then
                        self.toolcontext.info("*** ONLY PARSE...", 1)
                        exit(0)
                end

                return mmodules.to_a
        end

        # Load recursively all modules of the group `mgroup`.
        # See `parse` for details.
        fun parse_group(mgroup: MGroup): Array[MModule]
        do
                var res = new Array[MModule]
                visit_group(mgroup)
                for mg in mgroup.in_nesting.smallers do
                        for mp in mg.module_paths do
                                var nmodule = self.load_module(mp.filepath)
                                if nmodule == null then continue # Skip error
                                # Load imported module
                                build_module_importation(nmodule)
                                var mmodule = nmodule.mmodule
                                if mmodule == null then continue # Skip error
                                res.add mmodule
                        end
                end
                return res
        end

        # Load a bunch of modules and groups.
        #
        # Each name can be:
        #
        # * a path to a module, a group or a directory of projects.
        # * a short name of a module or a group that are looked in the `paths` (-I)
        #
        # Then, for each entry, if it is:
        #
        # * a module, then is it parser and returned.
        # * a group then recursively all its modules are parsed.
        # * a directory of projects then all the modules of all projects are parsed.
        # * else an error is displayed.
        #
        # See `parse` for details.
        fun parse_full(names: Sequence[String]): Array[MModule]
        do
                var time0 = get_time
                # Parse and recursively load
                self.toolcontext.info("*** PARSE ***", 1)
                var mmodules = new ArraySet[MModule]
                for a in names do
                        # Case of a group
                        var mgroup = self.get_mgroup(a)
                        if mgroup != null then
                                mmodules.add_all parse_group(mgroup)
                                continue
                        end

                        # Case of a directory that is not a group
                        var stat = a.to_path.stat
                        if stat != null and stat.is_dir then
                                self.toolcontext.info("look in directory {a}", 2)
                                var fs = a.files
                                # Try each entry as a group or a module
                                for f in fs do
                                        var af = a/f
                                        mgroup = get_mgroup(af)
                                        if mgroup != null then
                                                mmodules.add_all parse_group(mgroup)
                                                continue
                                        end
                                        var mp = identify_file(af)
                                        if mp != null then
                                                var nmodule = self.load_module(af)
                                                if nmodule == null then continue # Skip error
                                                build_module_importation(nmodule)
                                                var mmodule = nmodule.mmodule
                                                if mmodule == null then continue # Skip error
                                                mmodules.add mmodule
                                        else
                                                self.toolcontext.info("ignore file {af}", 2)
                                        end
                                end
                                continue
                        end

                        var nmodule = self.load_module(a)
                        if nmodule == null then continue # Skip error
                        # Load imported module
                        build_module_importation(nmodule)
                        var mmodule = nmodule.mmodule
                        if mmodule == null then continue # Skip error
                        mmodules.add mmodule
                end
                var time1 = get_time
                self.toolcontext.info("*** END PARSE: {time1-time0} ***", 2)

                self.toolcontext.check_errors

                if toolcontext.opt_only_parse.value then
                        self.toolcontext.info("*** ONLY PARSE...", 1)
                        exit(0)
                end

                return mmodules.to_a
        end

        # The list of directories to search for top level modules
        # The list is initially set with:
        #
        #   * the toolcontext --path option
        #   * the NIT_PATH environment variable
        #   * `toolcontext.nit_dir`
        # Path can be added (or removed) by the client
        var paths = new Array[String]

        # Like (and used by) `get_mmodule_by_name` but just return the ModulePath
        fun search_mmodule_by_name(anode: nullable ANode, mgroup: nullable MGroup, name: String): nullable ModulePath
        do
                # First, look in groups
                var c = mgroup
                while c != null do
                        var dirname = c.filepath
                        if dirname == null then break # virtual group
                        if dirname.has_suffix(".nit") then break # singleton project

                        # Second, try the directory to find a file
                        var try_file = dirname + "/" + name + ".nit"
                        if try_file.file_exists then
                                var res = self.identify_file(try_file.simplify_path)
                                assert res != null
                                return res
                        end

                        # Third, try if the requested module is itself a group
                        try_file = dirname + "/" + name + "/" + name + ".nit"
                        if try_file.file_exists then
                                var res = self.identify_file(try_file.simplify_path)
                                assert res != null
                                return res
                        end

                        # Fourth, try if the requested module is itself a group with a src
                        try_file = dirname + "/" + name + "/src/" + name + ".nit"
                        if try_file.file_exists then
                                var res = self.identify_file(try_file.simplify_path)
                                assert res != null
                                return res
                        end

                        c = c.parent
                end

                # Look at some known directories
                var lookpaths = self.paths

                # Look in the directory of the group project also (even if not explicitly in the path)
                if mgroup != null then
                        # path of the root group
                        var dirname = mgroup.mproject.root.filepath
                        if dirname != null then
                                dirname = dirname.join_path("..").simplify_path
                                if not lookpaths.has(dirname) and dirname.file_exists then
                                        lookpaths = lookpaths.to_a
                                        lookpaths.add(dirname)
                                end
                        end
                end

                var candidate = search_module_in_paths(anode.hot_location, name, lookpaths)

                if candidate == null then
                        if mgroup != null then
                                error(anode, "Error: cannot find module `{name}` from `{mgroup.name}`. Tried: {lookpaths.join(", ")}.")
                        else
                                error(anode, "Error: cannot find module `{name}`. Tried: {lookpaths.join(", ")}.")
                        end
                        return null
                end
                return candidate
        end

        # Get a module by its short name; if required, the module is loaded, parsed and its hierarchies computed.
        # If `mgroup` is set, then the module search starts from it up to the top level (see `paths`);
        # if `mgroup` is null then the module is searched in the top level only.
        # If no module exists or there is a name conflict, then an error on `anode` is displayed and null is returned.
        fun get_mmodule_by_name(anode: nullable ANode, mgroup: nullable MGroup, name: String): nullable MModule
        do
                var path = search_mmodule_by_name(anode, mgroup, name)
                if path == null then return null # Forward error
                return load_module_path(path)
        end

        # Load and process importation of a given ModulePath.
        #
        # Basically chains `load_module` and `build_module_importation`.
        fun load_module_path(path: ModulePath): nullable MModule
        do
                var res = self.load_module(path.filepath)
                if res == null then return null # Forward error
                # Load imported module
                build_module_importation(res)
                return res.mmodule
        end

        # Search a module `name` from path `lookpaths`.
        # If found, the path of the file is returned
        private fun search_module_in_paths(location: nullable Location, name: String, lookpaths: Collection[String]): nullable ModulePath
        do
                var candidate: nullable String = null
                for dirname in lookpaths do
                        var try_file = (dirname + "/" + name + ".nit").simplify_path
                        if try_file.file_exists then
                                if candidate == null then
                                        candidate = try_file
                                else if candidate != try_file then
                                        # try to disambiguate conflicting modules
                                        var abs_candidate = module_absolute_path(candidate)
                                        var abs_try_file = module_absolute_path(try_file)
                                        if abs_candidate != abs_try_file then
                                                toolcontext.error(location, "Error: conflicting module file for `{name}`: `{candidate}` `{try_file}`")
                                        end
                                end
                        end
                        try_file = (dirname + "/" + name + "/" + name + ".nit").simplify_path
                        if try_file.file_exists then
                                if candidate == null then
                                        candidate = try_file
                                else if candidate != try_file then
                                        # try to disambiguate conflicting modules
                                        var abs_candidate = module_absolute_path(candidate)
                                        var abs_try_file = module_absolute_path(try_file)
                                        if abs_candidate != abs_try_file then
                                                toolcontext.error(location, "Error: conflicting module file for `{name}`: `{candidate}` `{try_file}`")
                                        end
                                end
                        end
                        try_file = (dirname + "/" + name + "/src/" + name + ".nit").simplify_path
                        if try_file.file_exists then
                                if candidate == null then
                                        candidate = try_file
                                else if candidate != try_file then
                                        # try to disambiguate conflicting modules
                                        var abs_candidate = module_absolute_path(candidate)
                                        var abs_try_file = module_absolute_path(try_file)
                                        if abs_candidate != abs_try_file then
                                                toolcontext.error(location, "Error: conflicting module file for `{name}`: `{candidate}` `{try_file}`")
                                        end
                                end
                        end
                end
                if candidate == null then return null
                return identify_file(candidate)
        end

        # Cache for `identify_file` by realpath
        private var identified_files_by_path = new HashMap[String, nullable ModulePath]

        # All the currently identified modules.
        # See `identify_file`.
        var identified_files = new Array[ModulePath]

        # Identify a source file
        # Load the associated project and groups if required
        #
        # Silently return `null` if `path` is not a valid module path.
        fun identify_file(path: String): nullable ModulePath
        do
                # special case for not a nit file
                if path.file_extension != "nit" then
                        # search dirless files in known -I paths
                        if path.dirname == "." then
                                var res = search_module_in_paths(null, path, self.paths)
                                if res != null then return res
                        end

                        # Found nothing? maybe it is a group...
                        var candidate = null
                        if path.file_exists then
                                var mgroup = get_mgroup(path)
                                if mgroup != null then
                                        var owner_path = mgroup.filepath.join_path(mgroup.name + ".nit")
                                        if owner_path.file_exists then candidate = owner_path
                                end
                        end

                        if candidate == null then
                                return null
                        end
                        path = candidate
                end

                # Fast track, the path is already known
                var pn = path.basename(".nit")
                var rp = module_absolute_path(path)
                if identified_files_by_path.has_key(rp) then return identified_files_by_path[rp]

                # Search for a group
                var mgrouppath = path.join_path("..").simplify_path
                var mgroup = get_mgroup(mgrouppath)

                if mgroup == null then
                        # singleton project
                        var mproject = new MProject(pn, model)
                        mgroup = new MGroup(pn, mproject, null) # same name for the root group
                        mgroup.filepath = path
                        mproject.root = mgroup
                        toolcontext.info("found project `{pn}` at {path}", 2)
                end

                var res = new ModulePath(pn, path, mgroup)
                mgroup.module_paths.add(res)

                identified_files_by_path[rp] = res
                identified_files.add(res)
                return res
        end

        # Groups by path
        private var mgroups = new HashMap[String, nullable MGroup]

        # Return the mgroup associated to a directory path.
        # If the directory is not a group null is returned.
        #
        # Note: `paths` is also used to look for mgroups
        fun get_mgroup(dirpath: String): nullable MGroup
        do
                if not dirpath.file_exists then do
                        for p in paths do
                                var try = p / dirpath
                                if try.file_exists then
                                        dirpath = try
                                        break label
                                end
                        end
                        return null
                end label

                var rdp = module_absolute_path(dirpath)
                if mgroups.has_key(rdp) then
                        return mgroups[rdp]
                end

                # Hack, a group is determined by one of the following:
                # * the presence of a honomymous nit file
                # * the fact that the directory is named `src`
                # * the fact that there is a sub-directory named `src`
                var pn = rdp.basename(".nit")
                var mp = dirpath.join_path(pn + ".nit").simplify_path

                # dirpath2 is the root directory
                # dirpath is the src subdirectory directory, if any, else it is the same that dirpath2
                var dirpath2 = dirpath
                if not mp.file_exists then
                        if pn == "src" then
                                # With a src directory, the group name is the name of the parent directory
                                dirpath2 = rdp.dirname
                                pn = dirpath2.basename
                        else
                                # Check a `src` subdirectory
                                dirpath = dirpath2 / "src"
                                if not dirpath.file_exists then
                                        # All rules failed, so return null
                                        return null
                                end
                        end
                end

                # check parent directory
                var parentpath = dirpath2.join_path("..").simplify_path
                var parent = get_mgroup(parentpath)

                var mgroup
                if parent == null then
                        # no parent, thus new project
                        var mproject = new MProject(pn, model)
                        mgroup = new MGroup(pn, mproject, null) # same name for the root group
                        mproject.root = mgroup
                        toolcontext.info("found project `{mproject}` at {dirpath}", 2)
                else
                        mgroup = new MGroup(pn, parent.mproject, parent)
                        toolcontext.info("found sub group `{mgroup.full_name}` at {dirpath}", 2)
                end

                # search documentation
                # in src first so the documentation of the project code can be distinct for the documentation of the project usage
                var readme = dirpath.join_path("README.md")
                if not readme.file_exists then readme = dirpath.join_path("README")
                if not readme.file_exists then readme = dirpath2.join_path("README.md")
                if not readme.file_exists then readme = dirpath2.join_path("README")
                if readme.file_exists then
                        var mdoc = load_markdown(readme)
                        mgroup.mdoc = mdoc
                        mdoc.original_mentity = mgroup
                end

                mgroup.filepath = dirpath
                mgroups[module_absolute_path(dirpath)] = mgroup
                mgroups[module_absolute_path(dirpath2)] = mgroup
                return mgroup
        end

        # Load a markdown file as a documentation object
        fun load_markdown(filepath: String): MDoc
        do
                var s = new FileReader.open(filepath)
                var lines = new Array[String]
                var line_starts = new Array[Int]
                var len = 1
                while not s.eof do
                        var line = s.read_line
                        lines.add(line)
                        line_starts.add(len)
                        len += line.length + 1
                end
                s.close
                var source = new SourceFile.from_string(filepath, lines.join("\n"))
                source.line_starts.add_all line_starts
                var mdoc = new MDoc(new Location(source, 1, lines.length, 0, 0))
                mdoc.content.add_all(lines)
                return mdoc
        end

        # Force the identification of all ModulePath of the group and sub-groups.
        fun visit_group(mgroup: MGroup) do
                var p = mgroup.filepath
                for f in p.files do
                        var fp = p/f
                        var g = get_mgroup(fp)
                        if g != null then visit_group(g)
                        identify_file(fp)
                end
        end

        # Transform relative paths (starting with '../') into absolute paths
        private fun module_absolute_path(path: String): String do
                return getcwd.join_path(path).simplify_path
        end

        # Try to load a module AST using a path.
        # Display an error if there is a problem (IO / lexer / parser) and return null
        fun load_module_ast(filename: String): nullable AModule
        do
                if filename.file_extension != "nit" then
                        self.toolcontext.error(null, "Error: file `{filename}` is not a valid nit module.")
                        return null
                end
                if not filename.file_exists then
                        self.toolcontext.error(null, "Error: file `{filename}` not found.")
                        return null
                end

                self.toolcontext.info("load module {filename}", 2)

                # Load the file
                var file = new FileReader.open(filename)
                var lexer = new Lexer(new SourceFile(filename, file))
                var parser = new Parser(lexer)
                var tree = parser.parse
                file.close

                # Handle lexer and parser error
                var nmodule = tree.n_base
                if nmodule == null then
                        var neof = tree.n_eof
                        assert neof isa AError
                        error(neof, neof.message)
                        return null
                end

                return nmodule
        end

        # Remove Nit source files from a list of arguments.
        #
        # Items of `args` that can be loaded as a nit file will be removed from `args` and returned.
        fun filter_nit_source(args: Array[String]): Array[String]
        do
                var keep = new Array[String]
                var res = new Array[String]
                for a in args do
                        var l = identify_file(a)
                        if l == null then
                                keep.add a
                        else
                                res.add a
                        end
                end
                args.clear
                args.add_all(keep)
                return res
        end

        # Try to load a module using a path.
        # Display an error if there is a problem (IO / lexer / parser) and return null.
        # Note: usually, you do not need this method, use `get_mmodule_by_name` instead.
        #
        # The MModule is created however, the importation is not performed,
        # therefore you should call `build_module_importation`.
        fun load_module(filename: String): nullable AModule
        do
                # Look for the module
                var file = identify_file(filename)
                if file == null then
                        if filename.file_exists then
                                toolcontext.error(null, "Error: `{filename}` is not a Nit source file.")
                        else
                                toolcontext.error(null, "Error: cannot find module `{filename}`.")
                        end
                        return null
                end

                # Already known and loaded? then return it
                var mmodule = file.mmodule
                if mmodule != null then
                        return mmodule2nmodule[mmodule]
                end

                # Load it manually
                var nmodule = load_module_ast(file.filepath)
                if nmodule == null then return null # forward error

                # build the mmodule and load imported modules
                mmodule = build_a_mmodule(file.mgroup, file.name, nmodule)

                if mmodule == null then return null # forward error

                # Update the file information
                file.mmodule = mmodule

                return nmodule
        end

        # Injection of a new module without source.
        # Used by the interpreter.
        fun load_rt_module(parent: nullable MModule, nmodule: AModule, mod_name: String): nullable AModule
        do
                # Create the module

                var mgroup = null
                if parent != null then mgroup = parent.mgroup
                var mmodule = new MModule(model, mgroup, mod_name, nmodule.location)
                nmodule.mmodule = mmodule
                nmodules.add(nmodule)
                self.mmodule2nmodule[mmodule] = nmodule

                if parent!= null then
                        var imported_modules = new Array[MModule]
                        imported_modules.add(parent)
                        mmodule.set_visibility_for(parent, intrude_visibility)
                        mmodule.set_imported_mmodules(imported_modules)
                else
                        build_module_importation(nmodule)
                end

                return nmodule
        end

        # Visit the AST and create the `MModule` object
        private fun build_a_mmodule(mgroup: nullable MGroup, mod_name: String, nmodule: AModule): nullable MModule
        do
                # Check the module name
                var decl = nmodule.n_moduledecl
                if decl != null then
                        var decl_name = decl.n_name.n_id.text
                        if decl_name != mod_name then
                                error(decl.n_name, "Error: module name mismatch; declared {decl_name} file named {mod_name}.")
                        end
                end

                # Check for conflicting module names in the project
                if mgroup != null then
                        var others = model.get_mmodules_by_name(mod_name)
                        if others != null then for other in others do
                                if other.mgroup!= null and other.mgroup.mproject == mgroup.mproject then
                                        var node: ANode
                                        if decl == null then node = nmodule else node = decl.n_name
                                        error(node, "Error: a module named `{other.full_name}` already exists at {other.location}.")
                                        break
                                end
                        end
                end

                # Create the module
                var mmodule = new MModule(model, mgroup, mod_name, nmodule.location)
                nmodule.mmodule = mmodule
                nmodules.add(nmodule)
                self.mmodule2nmodule[mmodule] = nmodule

                var source = nmodule.location.file
                if source != null then
                        assert source.mmodule == null
                        source.mmodule = mmodule
                end

                if decl != null then
                        # Extract documentation
                        var ndoc = decl.n_doc
                        if ndoc != null then
                                var mdoc = ndoc.to_mdoc
                                mmodule.mdoc = mdoc
                                mdoc.original_mentity = mmodule
                        else
                                advice(decl, "missing-doc", "Documentation warning: Undocumented module `{mmodule}`")
                        end
                        # Is the module a test suite?
                        mmodule.is_test_suite = not decl.get_annotations("test_suite").is_empty
                end

                return mmodule
        end

        # Resolve the module identification for a given `AModuleName`.
        #
        # This method handles qualified names as used in `AModuleName`.
        fun seach_module_by_amodule_name(n_name: AModuleName, mgroup: nullable MGroup): nullable ModulePath
        do
                if n_name.n_quad != null then mgroup = null # Start from top level
                for grp in n_name.n_path do
                        var path = search_mmodule_by_name(grp, mgroup, grp.text)
                        if path == null then return null # Forward error
                        mgroup = path.mgroup
                end
                var mod_name = n_name.n_id.text
                return search_mmodule_by_name(n_name, mgroup, mod_name)
        end

        # Analyze the module importation and fill the module_importation_hierarchy
        #
        # Unless you used `load_module`, the importation is already done and this method does a no-op.
        fun build_module_importation(nmodule: AModule)
        do
                if nmodule.is_importation_done then return
                nmodule.is_importation_done = true
                var mmodule = nmodule.mmodule.as(not null)
                var stdimport = true
                var imported_modules = new Array[MModule]
                for aimport in nmodule.n_imports do
                        # Do not imports conditional
                        var atconditionals = aimport.get_annotations("conditional")
                        if atconditionals.not_empty then continue

                        stdimport = false
                        if not aimport isa AStdImport then
                                continue
                        end

                        # Load the imported module
                        var suppath = seach_module_by_amodule_name(aimport.n_name, mmodule.mgroup)
                        if suppath == null then
                                nmodule.mmodule = null # invalidate the module
                                continue # Skip error
                        end
                        var sup = load_module_path(suppath)
                        if sup == null then
                                nmodule.mmodule = null # invalidate the module
                                continue # Skip error
                        end

                        aimport.mmodule = sup
                        imported_modules.add(sup)
                        var mvisibility = aimport.n_visibility.mvisibility
                        if mvisibility == protected_visibility then
                                error(aimport.n_visibility, "Error: only properties can be protected.")
                                nmodule.mmodule = null # invalidate the module
                                return
                        end
                        if sup == mmodule then
                                error(aimport.n_name, "Error: dependency loop in module {mmodule}.")
                                nmodule.mmodule = null # invalidate the module
                        end
                        if sup.in_importation < mmodule then
                                error(aimport.n_name, "Error: dependency loop between modules {mmodule} and {sup}.")
                                nmodule.mmodule = null # invalidate the module
                                return
                        end
                        mmodule.set_visibility_for(sup, mvisibility)
                end
                if stdimport then
                        var mod_name = "standard"
                        var sup = self.get_mmodule_by_name(nmodule, null, mod_name)
                        if sup == null then
                                nmodule.mmodule = null # invalidate the module
                        else # Skip error
                                imported_modules.add(sup)
                                mmodule.set_visibility_for(sup, public_visibility)
                        end
                end

                # Declare conditional importation
                for aimport in nmodule.n_imports do
                        if not aimport isa AStdImport then continue
                        var atconditionals = aimport.get_annotations("conditional")
                        if atconditionals.is_empty then continue

                        var suppath = seach_module_by_amodule_name(aimport.n_name, mmodule.mgroup)
                        if suppath == null then continue # skip error

                        for atconditional in atconditionals do
                                var nargs = atconditional.n_args
                                if nargs.is_empty then
                                        error(atconditional, "Syntax Error: `conditional` expects module identifiers as arguments.")
                                        continue
                                end

                                # The rule
                                var rule = new Array[Object]

                                # First element is the goal, thus
                                rule.add suppath

                                # Second element is the first condition, that is to be a client of the current module
                                rule.add mmodule

                                # Other condition are to be also a client of each modules indicated as arguments of the annotation
                                for narg in nargs do
                                        var id = narg.as_id
                                        if id == null then
                                                error(narg, "Syntax Error: `conditional` expects module identifier as arguments.")
                                                continue
                                        end

                                        var mp = search_mmodule_by_name(narg, mmodule.mgroup, id)
                                        if mp == null then continue

                                        rule.add mp
                                end

                                conditional_importations.add rule
                        end
                end

                mmodule.set_imported_mmodules(imported_modules)

                apply_conditional_importations(mmodule)

                self.toolcontext.info("{mmodule} imports {mmodule.in_importation.direct_greaters.join(", ")}", 3)

                # Force standard to be public if imported
                for sup in mmodule.in_importation.greaters do
                        if sup.name == "standard" then
                                mmodule.set_visibility_for(sup, public_visibility)
                        end
                end

                # TODO: Correctly check for useless importation
                # It is even doable?
                var directs = mmodule.in_importation.direct_greaters
                for nim in nmodule.n_imports do
                        if not nim isa AStdImport then continue
                        var im = nim.mmodule
                        if im == null then continue
                        if directs.has(im) then continue
                        # This generates so much noise that it is simpler to just comment it
                        #warning(nim, "Warning: possible useless importation of {im}")
                end
        end

        # Global list of conditional importation rules.
        #
        # Each rule is a "Horn clause"-like sequence of modules.
        # It means that the first module is the module to automatically import.
        # The remaining modules are the conditions of the rule.
        #
        # Each module is either represented by a MModule (if the module is already loaded)
        # or by a ModulePath (if the module is not yet loaded).
        #
        # Rules are declared by `build_module_importation` and are applied by `apply_conditional_importations`
        # (and `build_module_importation` that calls it).
        #
        # TODO (when the loader will be rewritten): use a better representation and move up rules in the model.
        private var conditional_importations = new Array[SequenceRead[Object]]

        # Extends the current importations according to imported rules about conditional importation
        fun apply_conditional_importations(mmodule: MModule)
        do
                # Because a conditional importation may cause additional conditional importation, use a fixed point
                # The rules are checked naively because we assume that it does not worth to be optimized
                var check_conditional_importations = true
                while check_conditional_importations do
                        check_conditional_importations = false

                        for ci in conditional_importations do
                                # Check conditions
                                for i in [1..ci.length[ do
                                        var rule_element = ci[i]
                                        # An element of a rule is either a MModule or a ModulePath
                                        # We need the mmodule to resonate on the importation
                                        var m
                                        if rule_element isa MModule then
                                                m = rule_element
                                        else if rule_element isa ModulePath then
                                                m = rule_element.mmodule
                                                # Is loaded?
                                                if m == null then continue label
                                        else
                                                abort
                                        end
                                        # Is imported?
                                        if not mmodule.in_importation.greaters.has(m) then continue label
                                end
                                # Still here? It means that all conditions modules are loaded and imported

                                # Identify the module to automatically import
                                var suppath = ci.first.as(ModulePath)
                                var sup = load_module_path(suppath)
                                if sup == null then continue

                                # Do nothing if already imported
                                if mmodule.in_importation.greaters.has(sup) then continue label

                                # Import it
                                self.toolcontext.info("{mmodule} conditionally imports {sup}", 3)
                                # TODO visibility rules (currently always public)
                                mmodule.set_visibility_for(sup, public_visibility)
                                # TODO linearization rules (currently added at the end in the order of the rules)
                                mmodule.set_imported_mmodules([sup])

                                # Prepare to reapply the rules
                                check_conditional_importations = true
                        end label
                end
        end

        # All the loaded modules
        var nmodules = new Array[AModule]

        # Register the nmodule associated to each mmodule
        #
        # Public clients need to use `mmodule2node` to access stuff.
        private var mmodule2nmodule = new HashMap[MModule, AModule]

        # Retrieve the associated AST node of a mmodule.
        # This method is used to associate model entity with syntactic entities.
        #
        # If the module is not associated with a node, returns null.
        fun mmodule2node(mmodule: MModule): nullable AModule
        do
                return mmodule2nmodule.get_or_null(mmodule)
        end
end

# File-system location of a module (file) that is identified but not always loaded.
class ModulePath
        # The name of the module
        # (it's the basename of the filepath)
        var name: String

        # The human path of the module
        var filepath: String

        # The group (and the project) of the possible module
        var mgroup: MGroup

        # The loaded module (if any)
        var mmodule: nullable MModule = null

        redef fun to_s do return filepath
end

redef class MGroup
        # Modules paths associated with the group
        var module_paths = new Array[ModulePath]

        # Is the group interesting for a final user?
        #
        # Groups are mandatory in the model but for simple projects they are not
        # always interesting.
        #
        # A interesting group has, at least, one of the following true:
        #
        # * it has 2 modules or more
        # * it has a subgroup
        # * it has a documentation
        fun is_interesting: Bool
        do
                return module_paths.length > 1 or mmodules.length > 1 or not in_nesting.direct_smallers.is_empty or mdoc != null
        end

end

redef class SourceFile
        # Associated mmodule, once created
        var mmodule: nullable MModule = null
end

redef class AStdImport
        # The imported module once determined
        var mmodule: nullable MModule = null
end

redef class AModule
        # The associated MModule once build by a `ModelBuilder`
        var mmodule: nullable MModule
        # Flag that indicate if the importation is already completed
        var is_importation_done: Bool = false
end